Smart substitute for DENTIN
SDR is a one-component, fluorine-containing, light-curing, radiopaque composite restorative material. It is intended for use as a gasket in class I and II cavities.
The SDR material in modeling has the characteristics of a liquid composite, but can be applied in portions of 4 mm with minimal polymerization stress.
SDR has the property of "self-leveling", which allows you to get a thorough adaptation to the prepared walls of the cavity.
Offered in one universal shade. The material must be covered with a universal composite/composite for sealing the masticatory group of teeth based on methacrylate to replace the occlusal/vestibular enamel.
FORM OF RELEASE
SDR material is supplied in metered computers for direct intraoral administration. One universal color.
COMPOSITION
- Barium-alumino-fluoro-borosilicate glass
- strontium alumino-fluoro-silicate glass
- modified urethane dimethacrylate
- ethoxylated bisphenol-A dimethacrylate ( EBPADMA)
- Triethylene glycol dimethacrylate (TEGDMA)
- photoinitiator camphoroquinone (CQ)
- butylated hydroxyl toluene (BHT)
- UV stabilizer; titanium oxide
- iron oxide pigments
Compatible adhesives
SDR material is used after application of a suitable dentin/enamel adhesive and is compatible with traditional methacrylate-based dentin/enamel adhesives, including DENTSPLY light-cured composite adhesives.
Compatible restorative materials for enamel restoration
SDR material is used in combination with a suitable universal restorative or masticatory restorative to replace occlusal/vestibular enamel (see step-by-step instructions) and is compatible with traditional composite restorative materials on based on methacrylate. composites of the DENTSPLY company, intended for the manufacture of class I and II occlusal restorations (see the full guide to the use of the selected occlusal restorative material).
Storage conditions
SDR material must be stored in a well-ventilated area between 2 °C and 24 °C, avoiding direct sunlight. Refrigeration is optional but acceptable when the material is not in use. At the time of use, the material should be at room temperature. Protect from moisture. Do not freeze. Do not use after the expiration date.